Skip to Content
School of Engineering
Rapid Product and Process Development (RPD) Center

Publications

Journal Editorial

  • Asiabanpour, B., Editor-in-chief for International Journal of Rapid Manufacturing (IJRapidM), 2015-2022.
  • Asiabanpour, B., Guest editor to a special issue for International Journal of Rapid Manufacturing (IJRapidM) entitled: Adaptive Layered Manufacturing, 2012-2013.
  • Asiabanpour, B., Founding editor of the American Journal of Engineering Education (AJEE), (2010- 2014).

Chapters in Books

  • Randolph, O., & Asiabanpour, B. (Accepted / In Press). “Automation of an Off-Grid Vertical Farming System to Optimize Power Consumption”, In The Springer Nature - Book Series: Transactions on Computational Science & Computational Intelligence.
  • Zohra, F. T., & Asiabanpour, B. (Accepted / In Press). “Smart Automation of an Integrated Water System”, In The Springer Nature - Book Series: Transactions on Computational Science & Computational Intelligence.
  • Asiabanpour, B. Additive Manufacturing: Instrumental Systems in Research, Education, and Service. Springer (in progress).
  • Hayasi, M.T., Asiabanpour, B., Chapter: “Application of feature recognition in uniform and adaptive slicing for the rapid prototyping and rapid tooling processes” Book: “Computer Aided Design: Technology, Types and Practical Applications,” Nova Publishers, ISBN: 978-1-62257-346-2, 2012.
  • Asiabanpour, B., Mokhtar, A., and Houshmand, M., Chapter: Rapid Manufacturing, “Collaborative Engineering: Theory and Practice,” Springer, ISBN: 978-0-387-47319-2, 2008.
  • Khoshnevis, B. and Asiabanpour, B., Chapter 8, “Rapid Prototyping: Theory and Practice,” Springer, ISBN: 0-387-23290-7, 2006.

Books

  • Tavakoli A. and Asiabanpour, B., “An Introduction to Robot Technology,” (in Persian) Tehran, Iran, 1999.
  • Asiabanpour, B., and Yousefzadeh, J., “Learning AutoCAD 14,” (in Persian) Tehran, Iran, 1998.

Patents

  • Asiabanpour, Bahram, Moghimi, Faraz. "A Comprehensive Multi-criteria Multi-objective Economic Analysis Tool for the Vertical Farming and Similar Businesses". The United States. Number / ID: 63108538. (Date Awarded: 2020).
  • Asiabanpour, Bahram, Olson, Isaac "AUTONOMOUS FARMING GROWTH CONTROL AND MAINTENANCE SYSTEMS," Patent Cooperation Treaty. Number / ID: 39977-P064WO(Application: June 11, 2020).
  • Ramirez, Ricardo, Asiabanpour, Bahram "ROBOT AND COUPLING JOINT SUITABLE FOR USE WITH OPTICAL FIBER DAYLIGHTING SYSTEM," United States. Number / ID: -Texas State Ref. No. I 2018-006 (Winstead Ref. No. 39977-P060V1)(Application: 2019).

Refereed Journal Articles

  • Asiabanpour, B., & Almusaied, Z. (2021). A Novel Design of Hybrid Hydrophilic-Superhydrophobic Surfaces for Fog Harvesting. International Journal of Engineering Materials and Manufacture. Published.
  • Asiabanpour, B., & Summers, M. (2021). Improving Heat Transfer from Peltier Devices Used in an Atmospheric Water Generation. International Journal of Engineering Materials and Manufacture. Published.
  • Moghimi, F., Ghoddusi, H., Asiabanpour, B., & Behroozikhah, M. (2021). Is Atmospheric Water Generation an Economically Viable Solution? Clean Technologies and Environmental Policy (CTEP). Published.
  • Asiabanpour, B., Zohra, F., & Akanda, M. (2021). The Effect of Macroscopic and Microscopic Patterns of Stainless Steel Surface on the Efficiency of Dropwise Condensation and Precipitation. International Journal of Engineering Materials and Manufacture. Published.
  • Fidan, I., Shane Terry, S., Lu, H., Zhang, Y., Tantawi, K., Guo, T., & Asiabanpour, B. (2020). The Influence of Smart Manufacturing towards Energy Conservation: a Review. Technologies: Innovations in Materials Processing. 2020.
  • Asiabanpour, B., Almusaied, Z. Davidson, K., Rainosek, K. (2019). A comparison between simulation and empirical methods to determine fixed versus sun-tracking photovoltaic panel performance, International Journal of Computer Applications in Technology (IJCAT).
  • Asiabanpour, B., Estrada, A., Ramirez, R., & Downey, M. (2018). Optimizing Natural Light Distribution for Indoor Plant Growth Using PMMA Optical Fiber: Simulation and Empirical Study. Journal of Renewable Energy.
  • Almusaied, Z. , Asiabanpour, B., & Aslan, S. (2018). Optimization of Solar Energy Harvesting: An Empirical Approach. Journal of Solar Energy, 2018. Published. https://doi.org/https://doi.org/10.1155/2018/960973
  • Asiabanpour, B., Fuentes, J., Hawkes, N. (2017). Utilizing Dynamic Simulation in Design, Development, and Optimization of a Centrifugal-Powered Transmission Apparatus. International Journal of Computer Applications in Technology.
  • Asiabanpour, B., Almusaied, Z., Aslan, S., Hawkes, N., Rainosek, K., Lee, H., Leake, E., Fuentes, J., Bland, A., Mitchell, M. (2017). Fixed versus Sun Tracking Solar Panels: An Economic Analysis. Clean Technologies and Environmental Policy (CTEP).
  • Asiabanpour, B. (2015). Integrating Global, Ethical, and Multicultural (GEM) Issues into the Manufacturing Engineering Senior Design Projects. Journal of Diversity Management (JDM), 10, 1-10.
  • Asiabanpour, B. “Integrating Global, Ethical, and Multicultural (GEM) Issues into the Manufacturing Engineering Senior Design Projects”, Journal of Diversity Management (JDM), Volume 10, Number 1, Pages 1-10, 2015.
  • Asiabanpour, B., Ardis, A. and Andrade, A. A. (2014) “A systematic use of reverse engineering in evaluating the overall accuracy of the fabricated parts”, International Journal of Rapid Manufacturing-Special issue: Remanufacturing, Volume 4, Nos. 2/3/4, Pages 165–178, 2014.
  • Hayasi, M., Asiabanpour, B., “Close to CAD model curved-form adaptive slicing”, Rapid Prototyping Journal, Volume 20, Issue 2, 2014.
  • Hayasi, M.T., Asiabanpour, B., “Optimizing the brazing-based metal bonding for the Fully Dense Freeform Fabrication Process by Design of Experiments” ASTM- Materials Performance and Characterization (MPC) Journal, Volume 2, Issue 1, pages 360-370, 2013.
  • Asiabanpour, B., Hayasi, M., “Layer Alignment Tooling and Bonding Process for the Fully Dense Freeform Fabrication (FDFF) Adaptive Layering Process”, International Journal of Rapid Manufacturing (IJRapidM) Volume 3, Nos. 2/3, Pages 172-194, 2013.
  • Hayasi, M., Asiabanpour, B., "A New Adaptive Slicing Approach for the Fully Dense Freeform Fabrication (FDFF) Process", Journal of Intelligent Manufacturing (JIM), ISI Journal, Volume 24, Issue 4, Pages 683-694, 2013.
  • Asiabanpour, B., Chen, H., “Automated layer aligning and stacking system for the Fully Dense Freeform Fabrication Process”, Advanced Materials Research, Volume 655-657, pages 1251-1255, 2013.
  • Um, D., Asiabanpour, B., Foor, D., Kurtz, M., Tellers, M. and McGregor, M.T. “Crystallographic edge removal of silicon dioxide micro-parts in bulk micromachining”, International Journal of Rapid Manufacturing, Volume 2, No. 4, Pages 299–315, 2011.
  • Ameri, F., McArthur, C., Asiabanpour, B., and Hayasi, M. “A Web-based Framework For Semantic Supplier Discovery for Discrete Part Manufacturing”, SME/NAMRC 39 Transaction, 2011.
  • Asiabanpour, B., Wilson, T., “Building good quality prototypes for forensic face reproduction from low quality laser scanned files”, Int. Journal of Rapid Manufacturing, Vol. 2, Nos. 1/2, Pages 92-103, 2011. 
  • Stapleton, W., Um, D., Asiabanpour, B., Jimenez, J., “Challenges and Success in the REU ‘Micro/nano Assembly Workcell via Micro Visual Sensing’”, AJEE, Volume 1, Number 1, 2010.
  • Asiabanpour, B., Deschamp-Benke, N., Wilson, T., Loerwald, M., Gourgey, H., ““Bridging” Engineering & Art:  An Outreach Approach for Middle and High School Students”, American Journal of Engineering Education (AJEE), Volume 1, Number 1, 2010.
  • Gourgey, H., Asiabanpour, B., Fenimore, C., “Case Study of Manor New Tech High School: Promising Practices for Comprehensive High Schools”, American Journal of Engineering Education, Vol. 1, No. 1, 2010.
  • Asiabanpour, B., “A novel outreach to high school students by teaching them the engineering skills in a project-based approach”, Contemporary Issues in Education Research (CIER) Journal, Volume 3, Number 4, Pages 1-12, 2010, Journal acceptance rate 11-20%
  • Um, D., Asiabanpour, B., Jimenez, J., “A Flexible Micro Manufacturing System for Micro Parts”, Journal of Advanced Manufacturing Systems (JAMS), Volume 8, Number 2, Pages 137-152, 2009.
  • Asiabanpour, B., Mokhtar, A., Hayasi, M., Kamrani, A., Nasr, E., “An Overview on Five Approaches for Translating CAD Data into Manufacturing Information”, Journal of Advanced Manufacturing Systems (JAMS), Volume 08, Number 01, Pages 89-114, 2009.
  • Asiabanpour, B., Vejandla, D., Jimenez, J., Novoa, C., “Optimizing the Automated Plasma Cutting Process by Design Of Experiment”, International Journal of Rapid Manufacturing, Number 1, Pages 19-40, 2009.
  • Hayasi, M., Asiabanpour, B., “Machine Path Generation Using Direct Slicing from Design-by-Feature Solid Model for Rapid Prototyping”, IJAMT, Volume 45, Issue 2, Pages 170-180, 2009.
  • Hayasi, M., Asiabanpour, B., “Extraction of manufacturing information from design-by-feature solid model through feature recognition”, International Journal of Advanced Manufacturing Technology (IJAMT), Volume 44, Issue 11, Pages 1191-1203, 2009.
  • Asiabanpour, B., “Freeform fabrication assisting forensic scientists in identifying unidentified body remains”, Rapid Product Development magazine, Number 6, 2009.
  • McGregor, M., Mahlke, H., Dozier, S., Asiabanpour, B., Um, D., “Producing Micro Scale Silicon Dioxide Gears by Bulk Micro Machining Process”, SME/NAMRC 37, 2009.
  • Asiabanpour, B., Subbareddy, C., Kolichala, S., VanWagner, L., “The Heat Element Status Assignment Algorithms for the Selective Inhibition of Sintering Process Array-based Heating System” International Journal of Computer Application in Technology (IJCAT), Special Issue on: “Computer Based Design and Manufacturing” Volume 32, Number 2, Pages 104-109, 2008.
  • Asiabanpour, B., Subbareddy, C., Kolichala, S., VanWagner, L., “Computer Aided Energy and Material Savings for the SIS Process”, Society of Manufacturing Engineers/North American Manufacturing Research Institution (SME/NAMRI) Transaction, Volume 35, Pages 465-471, 2007.
  • Asiabanpour, B., Cano, R., Subbareddy, C., Wasik, F., VanWagner, L., McCormick, T., “A new heater design by radiation modeling and a new polymer waste-saving mechanism design for the SIS process”, Rapid Prototyping Journal, Volume 13, Number 3, Pages 136-147, 2007.
  • Asiabanpour, B. and Sriraman, V., “Tool Design for a Competitive World”, UNESCO World Transactions on Engineering and Technology Education, Volume 5, Number 1, Pages 187-190 (2006).
  • Palmer, K., Asiabanpour, B., Khoshnevis, B., “Development of a Rapid Prototyping System Using Response Surface Methodology” Journal of Quality and Reliability Engineering International, Number 22, Issue 8, Pages 919-937 (2006).
  • Asiabanpour, B., Khoshnevis, B., Palmer, K., “Advancements in the Selective Inhibition of Sintering Process Development”, Virtual and Physical Prototyping Journal, Vol. 1, Number 1, Pages 43-52 (2006).
  • Asiabanpour, B., Sriraman, V., “Teaching Integrated Product and Process Design”, UNESCO World Transactions on Engineering and Technology Education, Volume 4, Number 2, Pages 181-185 (2005).
  • Asiabanpour, B., Palmer, K., Khoshnevis, B., “An Experimental Study of Surface Quality and Dimensional Accuracy for Selective Inhibition of Sintering” Rapid Prototyping Journal, Volume 10, Number 3, Pages 181-192 (2004).
  • Asiabanpour, B., Khoshnevis, B., “Machine Path Generation for the SIS Process”, Journal of Robotics and Computer Integrated Manufacturing, Volume 20, Issue 3, Pages 167-175 (2004).
  • Khoshnevis, B., Asiabanpour, B., Mojdeh, M., and Palmer, K., “SIS – A New SFF Method Based on Powder Sintering”, Rapid Prototyping Journal, Volume 9, Number 1, Pages 30-36 (2003).
  • Asiabanpour, B., “Computer Aided Manufacturing”, IE Magazine (in Farsi), No. 16, 1998.
  • Asiabanpour, B., “Computer Aided Process Planning”, IE Magazine (in Farsi), No. 15, 1998.
  • Asiabanpour, B., “Computer Aided Design”, IE Magazine (in Farsi), No. 14, 1998.

Refereed Conference Proceedings:

  • Asiabanpour, B. (2022). EverGreen - An Off-Grid Automated Vertical Farming: Design, Development, and Lessons Learned, ESC 2022, NV.
  • Asiabanpour, B., Nodehi, M., Omer, L., & Ozbakkaloglu, T. (2021). A Modular Lightweight Additive Manufacturing System for Cementitious Materials with Diverse Aggregate Sizes. 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021)
  • Asiabanpour, B., & Almusaied, Z. (2021). A Novel Design of Hybrid Hydrophilic-Superhydrophobic Surfaces for Fog Harvesting. International Conference on Engineering Materials and Manufacture (ICEMM)
  • Asiabanpour, B., & Zohra, F. T. (2021). A Review of Super-Cool Passive Heat Radiating Materials. SAMPE 2021
  • Asiabanpour, B., Akanda, M., Randolph, O., Zohra, F., & Smyth, S. (2021). Achieving Reliable Automated Off-grid Indoor Vertical Farming by FMEA and Digital Twin. The 2021 World Congress in Computer Science, Computer Engineering, & Applied Computing (CSCE'21)
  • Asiabanpour, B., & Summers, M. (2021). Improving Heat Transfer from Peltier Devices Used in an Atmospheric Water Generation. International Conference on Engineering Materials and Manufacture (ICEMM)
  • Asiabanpour, B. (2021). Renewable Energy Research and Capacity Building for STEM Recruitment and Reinforcement. The 2021 World Congress in Computer Science, Computer Engineering, & Applied Computing (CSCE'21)
  • Asiabanpour, B., Summers, M., & Ownby, N. (2021). Smart Control of Commercially Available Atmospheric Water Generators for Reduced Power Consumption. The 2021 World Congress in Computer Science, Computer Engineering, & Applied Computing (CSCE'21)
  • Asiabanpour, B., Zohra, F., & Akanda, M. (2021). The Effect of Macroscopic and Microscopic Patterns of Stainless Steel Surface on the Efficiency of Dropwise Condensation and Precipitation. International Conference on Engineering Materials and Manufacture (ICEMM)
  • Asiabanpour, B., & Almusaied, Z. (2021). Utilizing Additive Manufacturing in Thermoacoustic Refrigeration-based Atmospheric Water Generation. 2021 Annual International Solid Freeform Fabrication Symposium (SFF Symp 2021)
  • Moghimi, F., Asiabanpour, B., Ghoddusi, H. (2020). A Framework for Financial Analysis of the Vertical Farming Systems. Paper presented at IISE 2020 Annual Conference, LA, 2020, IISE 2020 Annual Conference, New Orleans, LA
  • Asiabanpour, B., Moghimi, F., Zohra, F. T. (2020). An Integrated Rainwater Harvesting and Atmospheric Water Generation System. Paper presented at IISE 2020 Annual Conference, LA, 2020, IISE 2020 Annual Conference, New Orleans, LA
  • Randolph, O., Asiabanpour, B. (2020). Automation of an Off-Grid Vertical Farming System to Optimize Power Consumption. Paper presented at CSCE'20 - The 2020 World Congress in Computer Science, Computer Engineering, & Applied Computing, Las Vegas, NV.
  • Asiabanpour, B., Randolph, O., (2020). Energy Consumption Optimization in Off-Grid Vertical Farming. Paper presented at IISE 2020 Annual Conference, New Orleans, LA
  • Zohra, F. T., Asiabanpour, B. (2020). Smart Automation of an Integrated Water System. Paper presented at CSCE'20 - The 2020 World Congress in Computer Science, Computer Engineering, & Applied Computing, Las Vegas, NV, 2020
  • Moghimi, F., Ghoddusi, H., Asiabanpour, B., Behroozikhah, M. (2019). Atmospheric Water Generation (AWG): Performance Model and Economic Analysis. Paper presented at APMS 2019 International Conference of Advances in Production Management Systems, Austin TX
  • Asiabanpour, B., Ownby, N., Summers, M., & Moghimi, F. (2019). Atmospheric Water Generation and Energy Consumption: An Empirical Analysis, IEEE Texas Power and Energy Conference (TPEC 19)Ausanka, K., & Asiabanpour, B. (2019). Evaluation of a passive optical fiber daylighting system for vegetative plant growth, IEEE Texas Power and Energy Conference (TPEC 19).
  • Horner, R., Alvizo, E., & Asiabanpour, B. (Accepted / In Press). Engineering Approach Used in Hydroponics Designs and Automation. International Conference on Environmental Science and Technology 2018 (ICEST2018)
  • Ramirez, R., Casey, K., Silva, J., & Asiabanpour, B. (Accepted / In Press). Feasibility Comparison of Passive and Active Optical Fiber Daylighting Systems Utilizing PMMA Optical Fiber. International Conference on Environmental Science and Technology 2018 (ICEST2018)
  • Ownby, N., & Asiabanpour, B. (Accepted / In Press). Reduction of Power Consumption in Atmospheric Water Generation. International Conference on Environmental Science and Technology 2018  (ICEST2018)
  • Estrada, A., & Downey, M.,and Asiabanpour, B. (2018). Natural Light Uniform Distribution for Indoor Plant Growth using Light Design Simulation Systems. In IISE 2018.
  • Almusaied, Z.,and Asiabanpour, B. Atmospheric Water Generation: Technologies and Influential Factors. Paper presented at IISE2017, PA, 2017.
  • Tate, J., Navle, S., Asiabanpour, B., Cerda, J., Huff, S., Glaser, B., Melhorn, K., Mitchel, M. Electrical and Mechanical Properties of PA11 Blended with Nanographene Platelets Using Industrial Twin-Screw Extruder for Fused Deposition Modeling. SAMPE, Seattle, 2017.
  • Asiabanpour, B., Fuentes, J.(2016). Centrifugal Power Transmission Apparatus Design and Optimization using Dynamic Simulation. Paper presented at ASEE-GSW, 2016. ASEE-GSW  2016.
  • Asiabanpour, B., Almusaied, Z., Hawkes, N., Rainosek, K., Aslan, S. (2016). Optimization of the Solar Energy Harvesting Using Statistical Optimization. Paper presented at CSC'16-The 14th International Conference on Scientific Computing, Las Vegas, NV. Worldcomp 2016.
  • Fuentes, J. and Asiabanpour, B., “Centrifugal Power Transmission Apparatus Design and Optimization using Dynamic Simulation” ASEE-GSW 2016.
  • Asiabanpour, B., Sitienei, I., Ortiz, A., “Technical Tour and Campus Visit to a Four Year University and Its Impact on The Decision of The Students from the Minority Community Colleges in Selecting a STEM Program as Their Field of Study and Career”, CEIC 2016, Austin, TX, 2016.
  • Asiabanpour, B., Sitienei, I., Ortiz, A., “A Study on The Impact of a Week-Long Renewable Energy Training for The Faculty in Minority Community Colleges”, CEIC 2016, Austin, TX, 2016.
  • Ardis, A., Asiabanpour, B., Hawkes, N., Khodabakhsh, M., Mathis, S., “Centrifugal Power Transmission Apparatus Design, Development, and Optimization”, ASME- IMECE2015, TX 2015. 
  • Asiabanpour, B., Aslan, S., Salamy, H., Warren, J., Almusaied, Z., “Web-based Data Management System Design and Development for the Multisite Renewable Energy Research and Education Partnership”, Worldcomp 2015: The 11th Int. Conference on Grid & Cloud Computing and Applications, NV, 2015.
  • Almusaied, Z., Asiabanpour, B., Salamy, H., Jimenez, J., Aslan, S., “Solar Energy Generation: Roadblocks and Their Economically Viable Remedies”, IERC2015, TN, 2015.
  • Oritz, A., Asiabanpour, B., Aslan, S., Jimenez, J., Salamy, H., Kim, Y., “Engaging Students in Environmental Learning and Awareness of Green Design Technologies and Careers through a Pre-Engineering Program”ASEE2015, WA, 2015.
  • Aslan, S., Asiabanpour, B., Jimenez, J., Salamy, H., Cook, R., “Constant Power Production and Harvesting Using Roof Ventilation Systems”, FAIM 2014, San Antonio, TX, 2014.
  • Ardis, A., Alvarez Andrade, A., McNamara, J., Ahrens, A., Janysek, J., Humble, J., Asiabanpour, B., “A systematic use of reverse engineering in evaluating the overall accuracy of the fabricated parts”, 24th International Symposium on Solid Freefrom Fabrication (SFF), Austin, TX, 2013.
  • Asiabanpour, B., “Integrating Global, Ethical, and Multicultural (GEM) Issues into the Manufacturing Engineering Senior Design Projects”, TXNAME, TX 2013.
  • Asiabanpour, B., Chen, H., “Automated layer aligning and stacking system for the Fully Dense Freeform Fabrication Process”, 3rd Int. Con. on Adv. in Mat. and Man. Processes (ICAMMP 2012), China, 2012.
  • Hayasi, M. and Asiabanpour, B., “Conformed-to-CAD Design Sloped-Edge Adaptive Slicing”, Solid Freeform Fabrication Symposium, SFF 2012, Austin, TX, 2012.
  • Conner, T. G., Loerwald, M., Hayasi, M., Asiabanpour, B., “Layer Alignment and Lamination for the Fully Dense Freeform Fabrication (FDFF) Process”, 22nd Int. Solid Freeform Fabrication Symposium, TX, 2011.
  • Hayasi, M. and Asiabanpour, B., “Adaptive Direct Slicing and Machine Path Generation for the Fully Dense Freeform Fabrication (FDFF) Process with the Variable Layers”, 22nd International Solid Freeform Fabrication (SFF) Symposium, Austin, TX, 2011.
  • Ameri, F., McArthur, C., Asiabanpour, B., and Hayasi, M. “A Web-based Framework For Semantic Supplier Discovery for Discrete Part Manufacturing”, NAMRC 39, OR, 2011.
  • Asiabanpour, B., “Integrating research and teaching activities in manufacturing engineering education”, High Impact Technology Exchange Conference (HI-TEC), San Francisco CA, 2011.
  • Tellers, M., Kurtz, M., Foor, D., McGregor, M., Asiabanpour, B., Um, D., “Thin film silicon dioxide micro-scale parts release by Ethylenediamine-Pyrocatechol-Water solution”, FAIM 2010, Eastbay, CA, 2010.
  • Asiabanpour, B., Um, D., Jimenez, J., and Stapleton, W., “Second and final year of the NSF REU grant: Micro/Nano Assembly Workcell Via Micro Visual Sensing and Haptic Feedback”, NSF Engineering Education Awardees Conference, Reston, VA, 2010.
  • Asiabanpour, B., “A novel outreach to high school students by teaching them the engineering skills in a project-based approach”, The 2010 International College Teaching & Learning Conference, Orlando, FL, 2010.
  • Um, D., Asiabanpour, B., Tellers, M., Kurtz, M., Foor, D., McGregor, M., “Micro Scale Silicon Dioxide Gear Fabrication by Bulk Micromachining process”, IEEE-NEMS 2010, Xiamen, China, 2010.
  • Asiabanpour, B., Vejandla, D., Fischer, R., Jimenez, J., Novoa, C., “Optimizing the Quality of the Parts Made by the Automated Plasma Cutting Process by the Response Surface Methodology”, Solid Freeform Symposium, Austin, TX, 2009.
  • Um, D., Asiabanpour, B., Jimenez, J., “Undergraduate Research Project: Development of a Micro/Nano Assembly Workcell Via Micro Visual Sensing”, ASEE 2009 conference, Austin, TX, 2009.
  • Stapleton, W., Asiabanpour, B., Stern, H., Gourgey, H., “A Novel Engineering Outreach to High School Education”, Imagining and Engineering Future CSET Education, 2009 Frontiers in Education (FIE) Conference, San Antonio, TX, 2009. *Acceptance rate 9%.
  • McGregor, M., Mahlke, H., Dozier, S., Asiabanpour, B., Um, D., “Producing Micro Scale Silicon Dioxide Gears by Bulk Micro Machining Process”, SME/NAMRC 37, 2009.
  • Asiabanpour, B., “Integrating Rapid Prototyping into Product and Process Development”, Solid Freeform Fabrication (SFF) Symposium, Austin, TX, 2008.
  • Hayasi, M. and Asiabanpour, B., “Machine Path Generation Using Direct Slicing from Design-by-Feature Solid Model for Rapid Prototyping”, Solid Freeform Fabrication (SFF) Symposium, Austin, TX, 2008.
  • Asiabanpour, B., Melbye, J., Melbye, V., Jensen, E., Shaw, J., “Freeform fabrication assisting forensic scientists in indentifying unidentified body remains”, Solid Freeform Fabrication (SFF) Symposium, TX, 2008.
  • Asiabanpour, B., Subbareddy, C., “Manufacturing engineering capstone design course: Moving with the real world”, American Society for Engineering Education (ASEE) Annual Conference & Exposition, HI, 2007.
  • Asiabanpour, B., Subbareddy, C., Kolichala, S., VanWagner, L., “Computer Aided Energy and Material Savings for the SIS Process”, North American Manufacturing Research Conference 35, Ann Arbor, MI, 2007.
  • Asiabanpour, B., VanWagner, L., Kolichala, S., Jensen, E., Tseng, A., Lee, T., McCormick, T., “An array-based heating system design and development for the SIS process”, IERC, Orlando, FL, 2006.
  • Asiabanpour, B., Um, D., Sriraman, V., Tseng, A., Mata, J., Wahed, N., “Mobile Paving System: A New Large Scale Freeform Fabrication Method”, 16th Solid Freeform Fabrication (SFF) Symposium, TX, 2005.
  • Asiabanpour, B., Cano, R., VanWagner, L., McCormick, T., Wasik, F., “New Design for Conserving Polymer Powder for the SIS Rapid Prototyping Process”, 16th SFF Symposium, Austin, TX, 2005.
  • Asiabanpour, B., Sriraman, V., “Computer Aided Tool Design”, 3rd SME/CIRP International Conference on Manufacturing Engineering Education, San Luis Obispo, CA, 2005.
  • Asiabanpour, B., Wasik, F., Cano, R., Jayapal, V., VanWagner, L., McCormick, T., “New waste-saving heater design for the SIS Rapid Prototyping Process”, IERC, Atlanta, GA, 2005.
  • Asiabanpour, B., Khoshnevis, B., Palmer, K., “Systematic approach for RP processes development”, Industrial Engineering Research Conference (IERC), Houston, TX, 2004.
  • Asiabanpour, B., Sriraman, V., “Teaching Integrated Product and Process Design”, International Conference on Engineering Education (ICEE2004), Gainesville, FL, 2004.
  • Asiabanpour, B., Khoshnevis, B., Palmer, K., Mojdeh, M., “Advancements in the Selective Inhibition of Sintering”, 14th International Symposium on Solid Freefrom Fabrication (SFF), Austin, TX, 2003.
  • Asiabanpour, B., Palmer, K., Khoshnevis, B., “Performance factors in the Selective Inhibition of Sintering process”, Industrial Engineering Research Conference (IERC), Portland, OR, 2003.
  • Asiabanpour, B., Khoshnevis, B., “A new memory efficient tool path generation method for applying very large STL files in vector-by-vector rapid prototyping processes” Comp. and Industrial Engineering, CA, 2003.
  • Khoshnevis, B., Asiabanpour, B., Mojdeh, M., Koraishy, B., Palmer, K., and Deng, Z., “SIS – A new SFF method based on powder sintering”, 13th International Symposium on SFF, Austin, TX, 2002.
  • Asiabanpour, B.,"CAMAIRIC: A Computer Software in Computer Aided Manufacturing" The 6th Annual Industrial Engineering Conference. Tehran, Iran, 1999.
  • Asiabanpour, B., "Sharif: An Expert Process Planning System" 1st International ARC (Automation-Robotics-Control) Conference, Tabriz, Iran, 1998.